Spun, cast and stamped lamp components — to your drawing.
Brass, aluminium and steel lamp bases, bodies, arms, canopies, backplates, finials and shade rings, made to your print in our own Moradabad metalworks, finished from a named finish library and bought by the carton.
Lamp parts distributors and lighting assemblers.
Two buyer types, one component list. Both send a drawing or a sample and buy repeat cartons against a locked finish standard.
Lamp Parts Catalog Distributors
Distributors carrying a stocked parts catalog — bases, ferrules, finials, harps, shade rings and canopies — who need consistent repeat cartons of the same part, finish-matched across years of reorders.
Table & Floor Lamp Assemblers
Assemblers building table and floor lamps who buy bodies, stems, weighted bases and hardware to their own drawings and fit their own electrical components on the line.
Pendant & Sconce Assemblers
Pendant, chandelier and sconce makers sourcing canopies, backplates, arms, suspension hardware and hand-blown glass shades as a matched set on one order.
Drawing or sample in, carton out.
This is component supply, not catalog picking. You specify the part; we tool for it, prove a first article and then hold that spec — dimension, thread, weight and finish — across every carton that follows.
- Drawing, CAD file or physical sample in — we tool from your spec
- First article approved before any production run opens
- MOQ set in full cartons per part and finish, confirmed at quote
- Named finish standards held lot to lot across reorders
- Landed duty paid to your US assembly line or distribution center
Lamp component families we build.
Component families, not finished products. We build the parts that go inside your product, under your brand — we do not sell a competing finished line into your market.
Bases, Bodies & Weights
Spun and cast brass, aluminium and steel bodies, weighted and drilled to your drawing.
Arms, Stems & Swing Joints
Turned tubing, arms and adjustable joints machined to match the body and thread standard.
Canopies & Backplates
Stamped and spun ceiling canopies, wall backplates and mounting plates in matched finishes.
Finials
Cast and turned finials — classic, figural or bespoke to your collection.
Shade Rings, Harps & Fitters
Rings, harps, spiders and fitters sized to your shade and socket standard.
Socket Cups, Cups & Covers
Decorative cups, covers and sleeves machined to accept the electrical hardware you specify.
Chain, Rod & Suspension Hardware
Decorative chain, rods, loops and hooks finished to the same standard as the fixture.
Glass Shades & Globes
Hand-blown shades, globes and diffusers from our Firozabad furnaces in custom colours and frosts.
Turned Wood & Marble Bases
Saharanpur turned wood and carved stone bases for mixed-material lamp bodies.
Specify from the library, or send your own standard.
Every finish below is developed against your reference sample, locked as a named standard and repeated lot to lot.
| Material | Component forms | Finishes |
|---|---|---|
| Brass | Spun bodies and shades, sand castings, turned stems and ferrules, stamped sheet parts | Polished, brushed, antique, lacquered, gold plate, PVD |
| Aluminium | Gravity castings, spun shades and bodies, machined parts | Polished, brushed, powder coat, painted, lacquered |
| Stainless steel | Stamped and deep-drawn parts, turned components, welded assemblies | Mirror polish, brushed satin, PVD in gold, black and rainbow |
| Iron | Sand castings, forged bar, welded frames and brackets | Antique, black powder coat, waxed, lacquered |
| Copper | Spun and hammered forms, sheet components | Polished, antique, lacquered, plated |
| Glass | Hand-blown shades, globes, diffusers and vessels | Clear, frosted, tinted, ribbed and cut finishes |
How a lamp component is actually made.
Each process below runs in a factory we own and operate — no contract shop between you and the floor.
| Process | Typical components |
|---|---|
| Sand casting | Knobs, finials, brackets, legs, ornamental bodies |
| Spinning | Lamp bodies, shades, bases, cups, ferrules |
| Forging | Handles, bars, hooks, pulls, structural parts |
| Stamping & pressing | Backplates, canopies, escutcheons, sheet parts |
| Turning & machining | Stems, ferrules, threaded and mating parts |
| Plating, PVD & powder coat | Gold plate, nickel, PVD colour, powder-coated finishes |
| QC, packing & consolidation | First-article inspection, lot AQL checks, export packing |
| Glass blowing | Shades, globes, diffusers |
| Wood turning & carving | Turned bases, collars, decorative sleeves |
From your drawing to an approved first article.
Drawing or sample in
Send a CAD file, a dimensioned drawing or a physical sample part. A named engineer replies within one business day with anything still needed to quote — tolerances, thread spec, finish reference.
Quote and tooling plan
Within 48 hours you get a component price, the tooling required, tooling ownership terms and the carton MOQ per part and finish. Tooling and sampling are quoted separately from unit price.
Tooling and first article
We cut the mold, die or fixture, then produce a first article in your specified material and finish. Sample lead time is confirmed per part at quote, since it follows the tooling.
You approve, we lock the spec
Nothing goes to production until you sign off dimensions, weight, fit and finish. The approved article becomes the reference every later lot is inspected against at our Noida QC floor.
Production and repeat lots
60–90 days after sample approval for a first production run, with repeat lots planned against your forecast and held to the same locked standard.
QC, consolidation and LDP delivery
Inspected and packed in Noida, consolidated into one consignment, and delivered landed duty paid to your US plant or DC by Gemixx USA LLC — no brokers in between.
Lighting component questions, answered.
Catalog categories for lighting programs.
Lighting Hardware & Components
The full component range — bases, arms, canopies, finials, shade rings and glass shades.
View categoryLighting & Home Decor
Finished lanterns, candleholders and decorative accents from the same metal and glass craft.
View category
Glass & Candle Vessels
Hand-blown glass from our Firozabad furnaces — shades, globes and vessels in custom colours.
View category
Send us your lamp part drawing.
Send the drawing — a named engineer replies within one business day and a component price follows within 48 hours. Browse our product feeds for live specs and imagery.