The parts a fixture is built from.
Lamp bases and bodies, finials, harps and necks, canopies, cups and check rings, candle covers, breaks and spacers, chain and hooks — spun, cast, stamped and plated to your drawing in our own Moradabad metalworks, with plated finish samples in the post.
Components, not catalog parts.
This category is made to print. You send a drawing, a CAD file or a sample part; we tool for it, prove a first article and then hold that spec — dimension, thread, weight and finish — across every carton that follows.
The range is the working parts list of a table lamp, floor lamp, pendant or sconce: the body and base it stands on, the neck and harp that carry the shade, the canopy and check ring that finish the assembly, and the breaks, spacers, chain and hooks in between.
Made in our own factories. Metal parts are spun, cast, stamped, turned and plated in our own Moradabad units, glass is blown in Firozabad and wood turned in Saharanpur, with QC and packing consolidated in Noida — no third-party contract shop between you and the floor.
- Made to your CAD, drawings or sample part
- Spun, cast, stamped, turned and hand-chased metalwork
- Brass, aluminium, steel, stainless and iron
- Ten standing plated finishes, or matched to your reference
- MOQ in full cartons per part and finish, landed duty paid
Production lead time: 60–90 days after sample approval.
The lamp parts list, made to your drawing.
Every part below is made to your drawing, CAD file or sample — not picked from a stock catalog.
Lamp Bases & Bodies
Spun and cast brass, aluminium and steel bodies and weighted bases, drilled and tapped to your drawing.
Finials
Cast and turned finials — classic, figural or bespoke — threaded to your standard.
Harps & Necks
Harps in your saddle and height spec, plus turned necks and collars that carry the shade line.
Canopies
Stamped and spun ceiling canopies, backplates and mounting plates in matched finishes.
Cups & Check Rings
Socket cups, decorative cups and check rings sized to your socket and shade fitter.
Candle Covers
Candle covers and sleeves in metal and moulded finishes, cut to your length and diameter.
Breaks & Spacers
Turned and cast breaks, spacers, washers and collars that set the stack height of a body.
Chain & Hooks
Decorative chain, loops, hooks, rods and suspension hardware finished to the fixture standard.
Plated Finish Samples
Physical plated samples on the actual part, sent before you commit to a production carton.
Have a part in mind?
Send a drawing, a CAD file or a sample part. We tool, prototype in your chosen material and finish, and hold that spec across every carton.
Request a component quoteTen standing finishes, or your own.
The standing plated library for lamp components. Any of these can be applied across a whole parts list so a body, harp, canopy and finial read as one fixture.
Swatches shown are indicative only. Physical plated finish samples are supplied free with every quote — we match to your reference piece, lock it as a named standard on your account and repeat it lot to lot.
Metal, glass and wood in one parts list.
Because the metal, glass and wood factories are all ours, a mixed component list is inspected, packed and shipped as a single consignment.
Brass
Spun bodies and shades, sand-cast finials and fittings, turned necks, breaks and ferrules, stamped canopies and check rings.
Aluminium
Gravity castings, spun bodies and shades and machined parts where weight and cost matter more than mass.
Steel & Stainless
Stamped and deep-drawn canopies and backplates, turned stems, welded frames and PVD-finished parts.
Iron
Sand castings, forged bar and welded frames for lanterns, brackets and heavier fixture bodies.
Glass
Hand-blown shades, globes and diffusers from our Firozabad furnaces in custom colours and frosts.
Wood & Stone
Saharanpur turned wood bases, collars and sleeves, and carved stone bases for mixed-material bodies.
Lighting component questions, answered.
Pairs well with
Lighting & Home Decor
Finished lanterns, candleholders and decorative accents from the same metal and glass craft.
View category
Brass & Copper Artware
Spun, cast and hand-chased brass and copper from the same Moradabad metalworks.
View category
Glass & Candle Vessels
Hand-blown glass from our Firozabad furnaces — shades, globes and vessels in custom colours.
View category
Send us your lamp part drawing.
Send the drawing — a named engineer replies within one business day and a component price follows within 48 hours, with physical finish samples. Browse our product feeds for live specs and imagery.